Inspect the drain pump filter for clogs caused by lint, coins, or debris. Clean the filter thoroughly and check the drain hose for kinks or obstructions. Ensure the drain pump operates correctly by testing it with a multimeter for continuity. Replace faulty components as needed.

Check the thermal fuse for continuity, as a blown fuse prevents the heating element from functioning. Inspect the heating element for visible damage or breaks. Test the cycling thermostat and high-limit thermostat to ensure they regulate temperature properly. Replace any defective parts to restore heating.

Verify that the washer is balanced on a level surface and the load is evenly distributed. Inspect the drive belt for wear or damage and replace it if necessary. Test the lid switch to ensure it activates the spin cycle. For persistent issues, inspect the motor and control board for faults.

Overheating typically results from restricted airflow. Clean the lint filter, vent hose, and external vent to remove any blockages. Test the high-limit thermostat and thermal fuse for functionality. Replace defective parts and inspect the blower wheel for obstructions.

Error codes provide valuable insights into specific issues. Consult the user manual for code interpretations. Reset the appliance by unplugging it for a few minutes. If the error persists, inspect the control board and wiring connections. Consider seeking professional repair if needed.

If the washer makes banging or squealing noises, inspect the suspension rods and drum bearings for wear. For dryer noises, check the drum rollers, idler pulley, and drive belt. Tighten loose components and replace worn parts to eliminate noise.