In case if you are experiencing problems with the power to your Asko dryer, the first thing that you should do is check to make sure that your machine is still plugged in. Sometimes it can come disconnected by accident and you don’t even realize it. Try plugging in another device to the same outlet to see if it works, just to prove that the problem is not in the electrical outlet. The next thing that you should do is check your circuit breaker to make sure that the switch that controls the area that you have the appliance plugged in hasn’t been tripped. Next, make sure that you completely close the door on your Asko dryer. Then you should make sure that you have the power on by pressing that button. Then, assure that you have pushed start to get the cycle going. If you haven’t done all previous steps, then the appliance is designed so that it won’t start.

If none of these fix your machine power problem, you may need to consider professional Asko dryer repair. Another thing that you should do is to make sure that you have used the correct setting on your dryer. If you are not getting your clothes to come out of the dryer as dry as you want them to be than you might have the dryer on the right setting. Depending upon the dryer model, you may have digital controls that you can set from your panel controls, as well.

Something else that you may want to look into is emptying the water tank on your dryer if you have on your model. If you do have one of these tanks, then you will need to be emptying that tank after each time you dry your clothes. The machine should let you know when the tank needs to be emptied. If you are still having problems, you may need to consider calling a professional for some Asko dryer repair.

Something else that you will want to be aware of is that you should wait for a while after a cycle is over on your dryer before you try to use any of the buttons. Some of these Asko clothes dryers are designed to turn off the power to the appliance if the appliance is getting too warm. Also, take care to make sure that you clean out the lint trap on the machine and you need to clean out the condenser on the device from time to time.